Hi everyone,

I’m having a weird issue with text such as the one in this image. Big or small, fancy or regular, all text comes out looking like it does in the image - cracked and hollow. I’ve spent the last few days trying to figure out why, and I’m stumped.

I’ve tried printing slower and slower and adding more and more top layers (the bottom 2 bottle caps are completely solid with 100% infil), but it doesn’t seem to fix the issue.

Here’s what I’m working with:

  • Ender 3
    • Software 2.0.8.27
    • Hardware 4.2.2
  • CR Touch
  • PrusaSlicer 2.8.0
  • MakerBot PLA Filament
  • I’ve used various temperatures and speeds. All of them have generated the terrible text you see here

Thanks in advanced for the help!

Update: We seem to be getting somewhere!

The top 2 are the same ones featured in the post above. The bottom left was printed at 110% extrusion and normal speed. The bottom right was printed at 110% extrusion and a much slower speed for the text, and it looks much better! I’m printing another now with higher bridge flow rate (it was 70%, I set it to 85%), so I’ll update again in a few minutes when that finishes!

Thanks for the information about calibrating e steps from everyone! It’s getting late, so I don’t want to mess around with that tonight, but I’ll give it a shot tomorrow!

Update 2: welp.

That’s possibly the worst one yet. I’m reprinting the bigger insert piece seen in the original post to check if my printer simply can’t do that quality or if it’s the e steps. If it’s e steps, I’m going to bed…

Update 3:

Welp, seems like it’s the e-step. However, it’s too late for me to care about that right now, so I’m going to bed. Thanks for the help everyone! I’ll work on fixing the issue tomorrow

  • kboy101222@sh.itjust.worksOPEnglish
    0·
    7 months ago

    So despite having this printer for a while, I’m unsure of what a few things you’ve asked.

    First, the stuff I know how to answer:

    • afaik, it’s regular PLA. I bought it second hand but still fully sealed in the vacuum bag, so I’m not 1000% sure, but it only says PLA.
    • I unclogged the nozzle within the last couple of weeks with a cold pull. It was having issues with text before and after the unclogging.
    • The width seems unlikely. This problem has persisted through 2 filament brands. Unfortunately I don’t have calipers to test that with at the moment.
    • The settings I used for the bigger bottlecap (the one split into 2 pieces) were the default "0.08 mm SUPERDETAIL (0.4mm Nozzle) @ CREALITY found on PrusaSlicer. The bottom left cap used a semi-custom version of the same profile where I knocked the speed down to half. Figured it might have been too slow since the text came out way worse than the bottom right, which was printed on the “0.12 mm DETAIL” preset. If you don’t have access to PrusaSlicer, I’d be happy to copy over some of the settings.
    • Looking through PrusaSlicer, I don’t see any settings for flow speed other than Bridge Flow Speed, but I will get to googling and find it.

    The main thing I don’t understand is calibrating e-steps. I’m unsure of what an e-step is.

    Thanks for the quick (and detailed!) reply!

    • MrQuallzin@lemmy.worldEnglish
      0·
      7 months ago

      For calibrating your printer, I always recommend https://teachingtechyt.github.io/calibration.html. Everything is step-by-step and helps teach you about the calibrations and what different settings do. I agree with the other commenter that you’re underextruding, based on your layers not filling in. Getting your E-steps calibrated is extremely important, then I’d start working on flow rates (which can change between rolls and brands)