eSun and (obviously) Bambu provide filament configurations and process configs for their filaments in Orca Slicer (or Bambu Studio,but that won’t be used here anymore).

This is quite useful as a starting point for filaments you never used before, you don’t have to transfer the manufacturers recommendations (who often are quite generic. 170-250°? Really?) and is quite helpful for new users (which I sometimes have to help).

The question is: Are there any other manufacturers who do that? There are of course a few stock one delivered with Orca,but is there anyone else?

Edit:

So far we have the following:

Thank you @dwsharp

Polymaker

VoxelPLA

Thank you @alleycard

Extrudr

Thank you @Bronzie

Add:North

Others:

eSun

  • bluewing@lemm.eeEnglish
    0·
    8 days ago

    Don’t sweat such things. None of them are anymore than a starting point for a new filament. Every printer is a rule unto itself for best results with any given filament. And most filament brands put a sticker on the spool to tell you what temp ranges the extruder and heat bed generally work best with that brand.

    So pick a starting temperature for the nozzle and bed and then print a temp tower or two if you really want the best out of the filament with your particular printer. Then adjust accordingly and save YOUR profile. If it doesn’t matter much, those mid-range temps will work just fine. And no extra thought required.

    • philpo@feddit.orgOPEnglish
      0·
      8 days ago

      I know that,but for the rarer non PLA/PETG stuff you only print once in a few weeks it’s sometimes handy - and I kind of “preach” 3D printing to non-technical,often older, people sometimes, and they are often “not that sure what they are doing” yet, so that helps a lot.

      And on the stickers things like density, flow, etc. are mostly not noted.

      • Ajen@sh.itjust.worksEnglish
        0·
        8 days ago

        Your slicer should have generic profiles for each material which should give acceptable results with most brands. Density and flow tend to by the same across brands for any given material, unless it’s a “rapid/high flow” or foaming filament, in which case the manufacturer prints the recommended settings on the spool. Basically if it’s not printed on the spool you can use just the defaults in your slicer.