I pointed out that the OS, trackpads and ergonomics are my main focus. Honestly, more Linux devices would be a win! Even if it ships with Windows but there’s an easy, official way to get Linux on the thing that’d be great.

Yes! On Reddit I tried to explain several times that the Deck’s battery was 5200mah but not at 3.7 volts, and as such a badass 25000mah Anker would NOT charge it “at least 4 times” but probably 2.

It’s not a big deal tbh, but this is a thing people use on long flights, spreading misunderstandings can get people stuck mid flight without entertainment.

Brands: right now I would look at iniu first, Baseus and then maybe Ugreen but last time it wasn’t an epic offering. Anker IS a good brand, but after the fiasco with their eufy camera security, I avoid all their products. In fairness however if you’re not going to boycott them, a power bank or charge cable is not going to be a security risk….

Thanks :)

I’ve got a 90 degree adapter, and made myself a brace of sorts to keep it from wiggling and stressing that precious usb c port… https://www.printables.com/model/292752-steam-deck-usb-c-right-angle-adapter-reinforcement

Right? When it started I felt it was a lose-lose situation: I might enjoy Apple products, but I do see the need to open them up at least a bit, so them winning would not be good. Epic winning on the other hand would give Epic something to stand on to criticize the greed of the 30% cut of Apple and Google, while apparently being fine with the same for EGS or consoles…

super easy to upgrade to 32/48gb

Not on an N95/97/100 as they support max 16… https://ark.intel.com/content/www/us/en/ark/products/231803/intel-processor-n100-6m-cache-up-to-3-40-ghz.html so they can be repaired, but not upgraded.

LIDAR sucks, accuracy wise. If you want accuracy, and hate yourself, then you need an iPhone XR/XS because that was the generation with the most accurate FaceID (for whatever reason). Or go photogrammetry, the LIDAR can help but isn’t the main thing there… this is both free and great. With a Mac you can get the data processed faster, or it can be done (paid) via cloud, or with less accuracy and a bit of patience, on device. It’s not going to be a professional solution, but depending on the task it works and chances are the hardware is already there :)

My brother had a moment like that as a kid. He had a phone and put it in a locker when he went to gym (kids stuff, you know. Get them active, get them tired) and… the locker wasn’t locked. Plus having the pin enabled was annoying so he didn’t have that either. Yep. He learned that lesson…

With access to a 3d printer one could print something like this https://www.thingiverse.com/thing:5430213/ (that I did print and works fine) or any other similar design.

And then there’s me, who got a new laptop a couple of days ago after looking into things, and the pre installed Windows worked perfectly to test the hardware worked fine… before being replaced by Linux.

Seconded. Between American Truck Simulator and Snowrunner I went through… I think Star Trek Voyager, Charmed and unavoidably something else too. Both games run well on the Deck (ATS has a Linux version: pick the Windows one, it’s far more optimized)

Edit: and Forza Horizon! Can’t forget that.

You might want to double check this, but as far as I remember both the Sovol SV06 and SV08 are open source. The SV06 sounds in line with your desired budget, IF I remember correctly the open source thing. And as others have said, Cura, Prusa slicer and Orca are open source and cross platform.

It’s even more incredible if you consider what they came from, Joe Danger, to a large game. Being a fan of Joe Danger I didn’t fall for the hype, as it seemed way too ambitious of a game. And then? It’s 8 years of free updates adding content even beyond what was initially promised.

Aside from the over promising at the beginning, or rushing the game launch depending on how you want to see it, it’s really great stuff. I cannot think of any other game starting as overwhelming negative, forcing Sony to work proper refund systems, to absolutely beloved by everyone.

A bit hard to tell, as every printer is different, but try a small test file at let’s say 100 mm/s? I use Cura (really, really dislike the Slic3r/Prusa Slicer/Orca interface) and here it’s called “Print Speed”. Changing that will lower the others in the same way, can’t imagine it works differently in Prusa Slicer.

This could be two things, aside from what you considered. Did you increase the speed? Because if I remember correctly the SV06 has a bit of a wimpy cooling system, and as opposed to the SV07, no extra fan on the back. Another thing to consider is that sometimes you just have a filament that is stringy, did you try a different one, or so far it’s your only option?

Some games don’t really use it in a meaningful way, others make it a key component of gameplay. Sometimes gimmicky, obviously. For example I tried Mario Galaxy on the Deck, there’s a puzzle that requires finding the right spot with the HD rumble. The Deck has the same kind of haptics, but it didn’t translate at all into something meaningful, so that one puzzle cannot be solved. Old school rumble is ok and nice, but modern devices (Steam Deck, Switch, PS5, something like last 10 years of iPhones, obviously the Steam Controller) have proper haptics and can really do weird things. Click on the trackpad of your Deck when it’s off. The click is faked with haptics, so there’s none when it’s off! Main problem is that both Microsoft and Nintendo are strikingly dumb, so Microsoft is still clinging to 30 year old tech with the classic rumble, and Nintendo has HD Rumble only on the real Switch… so developers can’t expect everything to have proper haptics, and fall back to rumble.

I have a Sovol SV07 Plus, that is the newer version of the SV06 Plus… or in other words, the mechanically identical, but larger, SV06. It’s easy to assemble, it’s bigger than the A1 Mini. Now, you don’t know how big your printer needs to be, until you find out that it’s too small! I found that the 22cm square offered by my old Ender 3 was enough for most things, but it wasn’t enough for everything. I also had a 12cm square with a Monoprice Select Mini Plus V2(the name was the biggest thing lol) and that was quick to become restrictive. Would I suggest the A1 Mini, that has halfway between the two? I don’t know. But at the same time it comes pre assembled (it might not be a concern for you) and easy to use. In short I would recommend the SV07 as that’s the small and less expensive version of what I have, but the SV06 should be mechanically identical so that gives me hope it’ll perform equally well. The downsides are a less than stellar control unit (the hardware inside the touchscreen), a weird as fuck cooling fan that is super loud, and instructions that trick you into believing that the packets of screws are numbered in a meaningful way. Don’t. That said it prints everything with ease, it’s really fast and that fan might be loud, but at the same time works wonders. I love it. Oh! Also. Once I ever so slightly fucked up the Z offset, making it scrape quite thoroughly the build surface: nothing got damaged, build surface included!