In client go to settings -> playback -> Queue all susequent episodes
In client go to settings -> playback -> Queue all susequent episodes
I never use shuffle, but check out is auto queue enabled
Thank you. It makes sense now
I have tried my m3u IPTV on jellyfin and it sucks, just use TiviMate for android or VLC on PC
I will if i dont forget. Feel free to remind me.
I was reading other comments as well. You can also disable transcoding on the client side, the video will not play at all if transcoding is required. Also try disabling subtitles, sometimes subtitles require transcoding for some reason (don’t know why tho).
Got one few days ago and I can confirm its working perfectly fine. I just did software update on first boot, installed jellyfin and next thing Im watching a movie
I agree, its not even worth to try imo. Frame geometry is super important. Even extrusions can be painfull if they are not cut well enough. If you want the best result you should mill them (instead of cutting them with a saw).
3D printer tolerances are far from acceptable and then every material shrinks differently (+ there are many other disadvantages).
On the other hand, prusa and voron are examples of great use of 3D printed parts where you benefit from flex. Its a brave design decision that works amazingly well, but they can barelly print first layer without ABL or simmilar. Yeah…ABL compensates for shitty tolerances and we end up with bent 3D printed part that counts as perfect print lol
Print again same gcode. If the rings are at the same height its Z axis issue, otherwise model is just too tall
Idealy you want a server that runs all the time and some kind of a player connected to projector for streaming. You can use your rpi for server, but NUC sounds better since it probably has SATA or m.2 port for storage. Raspbian or Ubuntu doesnt matter much since both are Debian based and setup should be simmilar. Look into servarr if you are interested in automated downloads. Then get Jellyfin for Netflix like experience with your local library. Most clients support Jellyfin player and Im using android TV stick. I have just ordered ChromeCast with Google TV 4K to replacce my old 1080p Xiaomi TV stick. You can also install Netflix app on any Android device.
It is also possible to plug your server directly to projector via hdmi, but then you have to install server apps together with client apps on the same machine. I guess you need a wifi keyboard and mouse for remote control. Having 2 devices is better IMO, but it should work as single device.
Rpi or NUC can also be used as a player, but got no experience in setting that up and Android box is better solution for me anyway
Thx for input.
I agree with you mostly, but there are also unfortunate examples even with big eu brand as well. Im not paranoid, but home 3D printer is more like production machine than kitchen appliance imo. They have moving parts and print failures happen sooner or later. Fire in a kitchen is not that rare it seems anyway.
Before reading comments, I wasnt aware that prusa is selling fire suppression system, but I guess there is a reason for that
I hook a filament around my neck before going to sleep. Every morning extruder pulls me out of the bed instead of using alarm. Don’t need a clock anymore and love to print in the morning anyway
Interesting comparison with water gun, but that would be equivalent of extruding in the air (even then I see it possible if the nozzle is not way too big). Think about connecting water pipe to a bigger diameter pipe. Water would fill the whole volume and it would just move slower if flow is laminar. There is also filament infront of the nozzle while printing so that should provide resistance (plus friction in the nozzle) to allow pressure build up. Nozzle shape might be important here, but I guess they just drilled 2.4 mm hole all the way through.
I obviously don’t know much about this nozzle, I’m not trying to teach anyone, I’m just having fun brainstorming and hopefully learning something new
Why doesn’t it just go through the center of the hole in the nozzle?
If you are asking about printing with bigger nozzle size than filament diameter, there should be positive pressure in all parts of hotend and filament is just moving slower where bigger cross section is. I don’t have experience with this kind of printing tho.
Btw, where did you find that nozzle is 2 mm? In video they mentioned printing 2 mm layer height, but that doesn’t define the nozzle size. You can print different layer widths and heights with the same nozzle. Good cross section is recommended for decent layer bond, but it looks like they are just laying the filament down with no squish.
For proper 2 mm layer height I guess we need 4 mm nozzle and 6 kg hotend/extruder lol
Nextcloud can sync between devices,so you can even use files while offline. There is recycle bin and many more features and apps available. I mostly use filebrowser just to manage files on the server. Both apps are amazing
Glad it worked!